Loungechair C40
Congratulations on getting your new chair!
From this link you can download the product brochure.
Here are some things you need to know as a chair owner:
1. Do not stand on the chair. Although the structure of the chair is durable, standing on the chair poses a risk of falling. Also, make sure that children do not stand on the chair.
2. The corners of the chair's backrest are at the height of the children's head. Make sure that children do not collide with the chair and that the chair is positioned so that it cannot be accidentally struck.
3. Do not place the chair backrest close to a wall or other such surface. The chair flexes slightly when sitting on it, whereby the backrest angle can hit the wall and cause surface damage. Find the right distance from the wall by trying to see how much the backrest can move when sitting down.
4. Be careful when transporting a chair. Sometimes the dimensions of the chair are difficult to visualize, so it can easily crash while transporting. If you are transporting your chair by car, protect it with a soft pad to prevent scratches and bumps caused by vibration.
5. Below the chair seat is a level where you can conveniently store items, such as a handbag or magazines. In this way, the space occupied by the chair can be doubled.
6. The chair is designed to sit comfortably in four different directions. The hard surface of the chair is durable and easy to keep clean, but if you are looking for softness, you can use a variety of pillows or duvets that fit into your interior design.
7. Make sure there are no sharp objects under the chair, such as small stones that came with the shoes; if they get stuck between the chair and the floor they can scratch the floor.
8. Underneath the chair there are four PVC rubber pads that lift the chair's base slightly off the floor to prevent scratching. The rubber paws do not make marks on the floor and they are fastened with acid-proof stainless steel screws, so they are durable in almost all conditions.
9. Wood is a natural material, so it may deform slightly when heat and humidity conditions change. When the wood is deformed, the chair's bottom may become slightly unbalanced, ie. the chair may slightly roam. You can get rid of this roaming by adjusting the PVC rubber pads under the chair. The pad is extended by tightening the screw, which then deforms the pad. The maximum height adjustment is 3..4mm. Be careful not to over tighten the screw as it may push through the hole in the pad, which will then release the pad. However, if this occurs, the screw must be completely unscrewed and the pad re-installed.
10. The chair is highly resistant to water and UV radiation, so it can also be used outdoors. However, in outdoor conditions, the chair will wear out faster, especially if it is exposed to constant humidity fluctuations, freezing or salt carried by air and rain in the vicinity of the sea. If the chair is used outdoors, we recommend at least protecting it during the winter or other periods of storage.
Hope you found this guide helpful! We'll be happy to answer any additional questions by email at info@uijui.com.